TM 9-2320-272-24-4
5-56. LOW CLUTCH REMOVAL AND CLEARANCE (Contd)
c. Establishing Clearance
Starting with clutch plate (2), alternately install eight clutch plates (2) and seven clutch discs (3) in
1.
adapter housing (1).
Measure distance from top edge of adapter housing (1) to top of clutch plate (2) with depth
2.
micrometer. Record measurement.
Position new rear cover gasket (4) on rear cover (5).
3.
Measure distance from top of edge of piston (6) to gasket (4) with depth micrometer. Record
4.
measurement.
Subtract step 4 measurement from step 2 measurement. Record the difference. This measurement is
5.
low clutch clearance.
Low clutch clearance, as determined in step 5, should be 0.073-0.141 in. (1.85-3.58 mm). If clutch
6.
clearance exceeds 0.141 in. (3.58 mm), replace clutch plates (2) and discs (3) with new, thicker
plates (2) and discs (3).
Remove eight clutch plates (2) and seven clutch discs (3) from adapter housing (1).
7.
5-376
