TM 9-2320-272-24-3
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES TM
M9361A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Four locknuts (Appendix D, Item 291)
Seven locknuts (Appendix D, Item 299)
Two lockwashers (Appendix D. Item 354)
1.
Remove four screws (l), locknuts (7), and fuel can holder (2) from upper bracket (6). Discard
locknuts (7).
2.
Remove two screws (3), washers (5), lockwashers (4), and lower bracket (8) from hydraulic oil filter
housing (10). Discard lockwashers (4).
3.
Remove seven locknuts (11) and screws (12) from upper bracket (6) and hydraulic oil reservoir (9).
Discard locknuts (11).
4.
Remove brackets (6) and (8) from oil reservoir (9).
1.
Position lower bracket (8) and upper bracket (6) on hydraulic oil filter housing (10) and install with
two new lockwashers (4), washers (5), and screws (3).
2.
Install bracket (6) on oil reservoir (9) with seven screws (12) and new locknuts (11).
3.
Install fuel can holder (2) on upper bracket (6) with four screws (1) and new locknuts (7).
4-896
