TM 9-2320-272-24-3
4-90. TRANSFER CASE SWITCH REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Two lockwashers (Appendix D, Item 352)
Four lockwashers (Appendix D, Item 384)
a. Removal
NOTE
Tag all leads for installation.
Disconnect two switch leads (10) from connectors (11).
1.
Remove grommet (8) and switch leads (10) from cab floor (9).
2.
Remove two screws (7), lockwashers (6), clamps (5), and switch leads (10) from transfer case shift
3.
lever (4). Discard lockwashers (6).
Remove four screws (3), lockwashers (2), and switch (1) from transfer case shift lever (4). Discard
4.
lockwashers (2).
b. Installation
1.
Install switch (1) on transfer case shift lever (4) with four new lockwashers (2) and screws (3).
2.
Install two switch leads (10) on transfer case shift lever (4) with two clamps (5), new lockwashers (6),
and screws (7).
3.
Insert two switch leads (10) through cab floor (9) and connect to connectors (11).
4.
Install grommet (8) around switch leads (10) and install on cab floor (9).
4-520
