TM 9-2320-272-24-3
4-71. TRANSMISSION REPLACEMENT (IN-VEHICLE) (Contd)
20.
Install two new lockwashers (3) and screws (2) on rear support bracket (4) and transmission (1).
Tighten screws (2) 65-85 lb-ft (88-115 Nlm).
NOTE
Perform steps 21 and 22 for vehicles equipped with transmission
PTO.
21.
Install pin (12) of PTO cable (11) on select lever (13) with washer (14) and new cotter pin (5).
22.
Install PTO cable (11) on bracket (7) with spacer plate (8), retainer strap (10), two screws (9), and
nuts (6).
23.
Connect wire (15) to transmission oil temperature transmitter (22).
24.
Install wire (20) on transmission flange (19) with clamp (18), new lockwasher (17), and screw (16).
4-474
