TM 9-2320-272-24-3
Section VI. ELECTRICAL SYSTEMS MAINTENANCE
4-64. ELECTRICAL SYSTEMS MAINTENANCE INDEX
PAGE
PARA.
TITLE
NO.
NO.
Front
Lights Cable Assembly (M939/A1) Replacement
Front
Wiring Harness (M939/A1) Replacement
Front
Wiring Harness (M939A2) Replacement
Rear
Wiring Harness Replacement
4-65. FRONT LIGHTS CABLE ASSEMBLY (M939/A1) REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
M939/A1
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
l Hood raised and secured (TM 9-2320-272-10).
MATERIALS/PARTS
l Parking brake set (TM 9-2320-272-10).
Four lockwashers (Appendix D, Item 369)
l Battery ground cables disconnected (para. 3-126).
Eight locknuts (Appendix D, Item 299)
l Splash shields removed (TM 9-2320-272-10).
Lockwasher (Appendix D, Item 379)
Ten locknuts (Appendix D, Item 291)
NOTE
Tag wires and connectors for installation.
1.
Disconnect front light cable connector (24) from wiring harness connector (21).
2.
Remove four nuts (26), lockwashers (25), screws (22), and wiring harness connector (21) from left
fender (23). Discard lockwashers (25).
Remove four locknuts (19) and screws (14) from right fender (13) and wiring cover (11). Discard
3.
locknuts (19).
4.
Remove grommet (18) from wiring cover (11).
5.
Disconnect wires (12), (15), (16), and (17) from cable assembly (20).
Remove wiring cover (11) from cable assembly (20).
6.
Remove four locknuts (5) and screws (1) from left fender (2) and wiring cover (4). Discard locknuts (5).
7.
Remove grommet (7) from wiring cover (4).
8.
Disconnect wires (8), (9), (10), and (3) from cable assembly (6).
9.
Remove wiring cover (4) from cable assembly (6).
10.
4-388
