TM 9-2320-272-24-2
Table 4-1. Mechanical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CAUTION
Cap or plug all openings immediately after disconnecting lines and
hoses to prevent contamination. Remove caps or plugs prior to
installation. Failure to do so may result in damage to equipment.
Step 8. Prepare hydraulic system for test.
a. Remove twelve screws (1), lockwashers (2), and rear winch control valve covers (3)
and (4) from wrecker (5). Discard lockwashers (2).
4-22
