TM 9-2320-272-24-2
NOTE
When new hydraulic oil reservoir is installed, use attaching
parts and fittings from old hydraulic oil reservoir.
Wrap all male threads with antiseize tape before installation.
1.
Install strainer (5), spacer (6), dipstick (7), and filler cap (8) on reservoir (9).
2.
Install elbow (4) on reservoir (9).
3.
Position reservoir (9) on frame bracket (14).
4.
Install nipple (16) and elbow (15) on reservoir (9).
5.
Install reservoir (9) on frame bracket (14) with eight screws (10) and new locknuts (11).
6.
Install oil return hose (12) on elbow (4) and tighten nut (3).
7.
Install oil supply hose (19) on elbow (15), and while holding nut (18), tighten nut (17).
8.
Install oil return hose (12) on reservoir (9) with clamp (1), screw (2), and nut (13).
9.
Install new tiedown straps on oil supply hose (19) as required.
3-862