TM 9-2320-272-24-2
3-298. VENT DOOR WEATHERSEAL REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Vent door weatherseal (Appendix D, Item 710)
Adhesive (Appendix C, Item 7)
a. Removal
1.
Open vent door (2).
2.
Remove vent door weatherseal (3) from vent door (2). Discard weatherseal (3).
b. Installation
NOTE
Surface of cowl vent door opening must be clean, dry, and free of
oil and grease before seal is installed.
1.
Apply thin coat of adhesive to mating surfaces of vent door (2) and new weatherseal (3) and allow to
dry until tacky.
2.
Position weatherseal (3) into channel (1) of vent door (2) and press firmly into place.
3-792
