TM 9-2320-272-24-2
3-227. PITMAN ARM REPLACEMENT (ROSS)
THIS TASK COVERS:
b. Installation
a. Removal
INITlAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDlTlON
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Cotter pin (Appendix D, Item 85)
Locknut ( Appendix D, Item 273)
1.
Remove
cotter pin (6) from slotted nut (5). Discard cotter pin (6).
2.
Remove
slotted nut (5) from drag link (4).
3.
Remove
locknut (3) and screw (1) from pitman arm (7). Discard locknut (3).
4.
Remove
pitman arm (7) from steering gear shaft (2) and drag link (4).
NOTE
Ensure pitman arm and steering gear shaft alignment marks
match.
1.
Install
pitman arm (7) on steering gear shaft (2) and drag link (4).
2.
Install
pitman arm (7) on steering gear shaft (2) with screw (1) and new locknut (3).
3.
Install
pitman arm (7) on drag link (4) with slotted nut (5). Tighten slotted nut (5) 140 lb-ft (190 Nm).
4.
Install
cotter pin (6) on slotted nut (5) and drag link (4).
3-653
