TM 9-2320-272-24-1
Tag wires and drive shaft for installation.
12.
Disconnect tachometer driveshaft (9) from instrument cluster (4).
13.
Disconnect speedometer driveshaft (14) from instrument cluster (4).
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
14.
Disconnect
air lines (5), (19), and (21) from instrument cluster (4).
15.
Disconnect
four wires (10) from instrument cluster (4).
16.
Disconnect
three wires (11) from instrument cluster (4).
17.
Disconnect
wire (15) from wire (17).
Wires in steps 20 through 28 are located behind instrument
cluster.
18.
Disconnect
five wires (8) from instrument cluster (4).
19.
Disconnect
wires (12) and (13) from instrument cluster (4).
20.
Disconnect
wires (16) and (18) from instrument cluster (4).
21.
Disconnect
wires (24) and (23) from instrument cluster (4).
22.
Disconnect
wires (6) and (7) from instrument cluster (4).
23.
Disconnect
wire (20) from instrument cluster (4).
24.
Disconnect
two wires (22) from instrument cluster (4).
25.
Disconnect
cables (1), (2), and (3) from instrument cluster (4).
3-240
