TM 9-2320-272-24-l
Steps 1 and 2 are for M939/A1 vehicles only.
Assistant will help with step 1.
1.
Install new gasket (4), spacer (5), new gasket (6), and starter (9) on flywheel housing (3) with two
washers (7) and screws (8). Tighten screws (8) 55 lb-ft (76 Nm).
2.
Install screw-assembled washer (1) in starter (9).
Steps 3 and 4 are for M939A2 vehicles only.
Assistant will help with step 4.
Install three sleeves (28) on starter (9).
3.
Install new gasket (4), spacer (6), new gasket (6), and starter (9) on flywheel housing (3) with three
4.
washers (7) and screws (8). Tighten screws (8) 55 lb-ft (75 Nm).
Step 5 is for M939/A1 vehicles only.
Install wire (19) on solenoid (2) with clip (20) and screw (21).
5.
Step 6 is for M939A2 vehicles only.
6.
Install wire (27) on starter (9) with new lockwasher (26) and nut (25).
Ground strap will be present on M939/A1 vehicles only.
7.
Install ground strap (10) and wires (11) and (14) on starter (9) with new lockwasher (13) and
nut (12).
Install wires (15) and (18) on solenoid (2) with new lockwasher (17) and nut (16).
8.
Step 6 is for M939A2 vehicles only.
Install wire (22) on solenoid (2) with new lockwasher (23) and nut (24).
9.
3-236
