TM 9-2320-272-24-1
7.
Apply gasket sealant to pipe plug (30) threads. Using hex-head driver, install pipe plug (30) and
tighten 24-36 lb-in. (3-4 Nm).
8.
Turn off headlights (TM 9-2320-272-10).
9.
Stop engine (TM 9-2320-272-10).
10.
Seal wires (28), (27), (26), and (25) and connector (29) completely with gasket sealant.
11.
Install terminal cover (23) on alternator (1) with two new screw-assembled lockwashers (24).
FOLLOW-ON TASK: Install right splash shield (TM 9-2320-272-10).
3-231
