TM 9-2320-272-24-1
Table 2-3. Electrical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test 5. Test starter solenoid contractors.
Step 1. Set multimeter to 10-volt range.
Step 2. Connect multimeter between starter solenoid terminals.
Step 3. Crank engine and observe multimeter. A voltage reading exceeding 0.4 volt indicates
defective starter solenoid.
a. Replace starter (para. 3-82).
b. If malfunction still exists, go to tests 6, 7, and 8.
2-105
