TM 9-2320-260-34-2
15-13. DUMP BODY MAINTENANCE (Contd)
WARNING
Do not operate dump controls when dump body is removed.
Injury to personnel may result if lift cylinder is operated when
not secured.
NOTE
Steps 6 through 10 must be performed for right and left sides of
vehicle.
6. Remove thrust plate pin (1) from thrust plate (2) and roller arm (4).
7. Remove six locknuts (7) and screws (8) from hinge bracket (6). Discard locknuts (7).
8. Remove lubrication fitting (5) from hinge pin (11).
9. Remove locknut (10) and screw (9) from hinge bracket (6). Discard locknut (10).
10. Remove hinge pin (11) from hinge bracket (6).
11.
Remove hinge bracket (6) from dump body (3).
12. Connect guide lines to front and rear of dump body (3).
WARNING
All personnel must stand clear during lifting operations.
A shifting or swinging load may cause injury to personnel.
Ensure lifting capacity is greater than weight (2,700 lb
q
(1,226 kg)) of dump body. Failure to do so may result in injury
to personnel or damage to equipment.
NOTE
Assistant will help with steps 13 and 1 4 .
13.
Raise dump body (3) clear of subframe (12) and place on supports.
14. Remove chains and guide lines from dump body (3) and lifting device.
15-30
