TM 9-2320-260-34-2
Section Il. WRECKER BODY MAINTENANCE
15-4. WRECKER BODY MAINTENANCE INDEX
PAGE
PARA.
TITLE
NO.
NO.
Wrecker Body Replacement
Rear Winch Rollers Repair
I
15-5. WRECKER BODY REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-34P-2
M816
EQUIPMENT CONDITION
TOOLS
Crane turntable removed (para. 16-26).
General mechanic's tool kit
(Appendix B, Item 1)
GENERAL SAFETY INSTRUCTIONS
Lifting device
q All personnel must stand clear during lifting
Two chains
operations.
Two guide lines
q Ensure lifting capacity is greater than weight of
MATERIALS/PARTS
wrecker body.
Sixteen locknuts (Appendix D, Item 186)
Eighteen locknuts (Appendix D, Item 183)
Eight locknuts (Appendix D, Item 169)
NOTE
The left and right side body mounts are replaced the same. The art
shows the left side body mount.
1.
Remove four locknuts (12), two U-bolts (14), and two woodblocks (13) from frame rail (2) and
wrecker body (l). Discard locknuts (12).
2.
Remove four locknuts (15) and two U-bolts (16) from frame rail (2) and wrecker body (l). Discard
locknuts (15).
3. Remove four locknuts (17), two U-bolts (19), and four woodblocks (18) from frame rail (2) and
wrecker body (1). Discard locknuts (17).
4. Remove four locknuts (3), four mounting bolts (6), two plates (5), and four woodblocks (4) from
frame rail (2) and wrecker body (l). Discard locknuts (3).
5. Remove ten locknuts (10), screws (8), sixteen locknuts (9), screws (11), and two brackets (7) from
frame rail (2), Discard locknuts (10) and (9).
15-8
