TM 9-2320-260-34-2
15-5. WRECKER BODY REPLACEMENT (Contd)
WARNING
All personnel must stand clear during lifting operations. A
q
swinging or shifting load may cause injury or death to personnel.
Ensure lifting capacity is greater than weight (1,800 lb (817 kg))
q
of wrecker body. Failure to do so may result in injury to person-
nel or damage to equipment.
NOTE
Two assistants will help with steps 1 through 3.
Attach two guide lines to wrecker body (1).
1.
2.
Attach two chains to wrecker body (1).
3.
Attach lifting device to two chains.
4.
Raise wrecker body (1) from supports and position on frame rail (2). Ensure mounting holes of
frame rail (2) and wrecker body (1) are alined.
5.
Install two woodblocks (13) and two U-bolts (14) on frame rail (2) and wrecker body (1) with four
new locknuts (12).
6.
Install two U-bolts (16) on frame rail (2) and wrecker body (1) with four new locknuts (15).
7.
Install four woodblocks (18) and two U-bolts (19) on frame rail (2) and wrecker body (1) with four
new locknuts (17).
8.
Install two plates (5) and four woodblocks (4) on frame rail (2) and wrecker body (1) with four
mounting bolts (6) and four new locknuts (3).
9.
Install two brackets (7) on frame rail (2) with sixteen screws (11), new locknuts (9), ten screws (8),
and new locknuts (10).
NOTE
Two assistants will help with step 10.
10.
Remove lifting device, two chains, and guide lines from wrecker body (1).
15-10
