TM 9-2320-260-34-2
14-5. WINDSHIELD GLASS REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
MATERIALS/PARTS (Contd)
APPLICABLE MODELS
Rubber strip (Appendix D, Item 371)
All
Adhesive (Appendix C, Item 3)
TOOLS
REFERENCES (TM)
General mechanic's tool kit
TM 9-2320-260-20
(Appendix B, Item 1)
TM 9-2320-260-34P-1
Soft-head hammer (Appendix B, Item 47)
EQUIPMENT CONDITION
MATERIALS/PARTS
ZWindshield assembly removed (TM 9-2320-260-20).
Four lockwashers (Appendix D, Item 244)
q Windshield arm, glass, and handle removed
Two lockwashers (Appendix D, Item 249)
(TM 9-2320-260-20).
1. Remove four screws (2) and lockwashers (1) from windshield frame (10). Discard lockwashers (l).
2. Remove two nuts (5), lockwashers (4), screws (3), and crosspiece (6) from windshield frame (10).
Discard lockwashers (4).
NOTE
Measure old rubber strip for installation.
3. Remove rubber strip (7) from crosspiece (6). Discard rubber strip (7).
4. Remove windshield glass (8) and rubber strips (9) from windshield frame (10). Discard rubber strips (9).
NOTE
Cut four new rubber strips to size.
1. Apply adhesive to three new rubber strips (9) and install on windshield glass (8).
2. Install windshield glass (8) in windshield frame (10). Tap windshield glass (8) gently into position.
3. Apply adhesive to new rubber strip (7) and install on windshield glass (8).
4. Position crosspiece (6) on windshield frame ( 10) and gently tap until screw holes aline.
5. Install two screws (3), new lockwashers (4), nuts (5), four new lockwashers (1) and screws (2)
on windshield frame (10) and crosspiece (6).
6. Trim excess rubber strip (7) and (9) and adhesive from around windshield glass (8).
FOLLOW-ON TASKS: Z Install windshield arm, glass, and handle (TM 9-2320-260-20).
q Install windshield assembly (TM 9-2320-260-20).
14-6
