TM 9-2320-260-34-1
7-4. REAR WIRING HARNESS REPLACEMENT (Contd)
NOTE
Steps 19 and 20 apply to M818 vehicles.
19.
Remove locknut (5), screw (2), lockwasher (3), two wires (4), and clamp (13) from rear cross-
member (1). Discard locknut (5) and lockwasher (3).
20.
Remove clamp (13) from rear wiring harness (8).
21.
Remove locknut (5), screw (2), lockwasher (3), and two wires (4) from rear crossmember (1). Discard
lockwasher (3) and locknut (5).
NOTE
Receptacle cover must be lifted and held open to remove top two
screws.
22.
Remove four locknuts (7), screws (12), cover (11), and trailer receptacle (6) from rear cross-
member (1). Discard locknuts (7).
NOTE
Left and right composite lights are disconnected the same.
Step 23 covers the left composite light.
Disconnect four left composite light wires (9) from four harness leads (10).
23.
7-26
