TM 9-2320-260-34-1
5-22. FUEL PUMP GOVERNOR REPLACEMENT (Contd)
1. Install throttle levers (5) and (7) on governor (3) in marked positions. Tighten nuts (4) and
screws (6).
NOTE
Perform step 2 if adapter was removed.
2. Position new gasket (11) and O-ring (12) on adapter (10) and install on governor (3).
3. Position new seal (9) and governor (3) on fuel pump (8) and install with new seal (2) and screw (1).
4. Install spring (20) on throttle lever (7) and bracket (19).
5. Install new filter screen (21), retainer (22), O-ring (23), filter (24), spring (25), gasket (26), and filter
cap (13) on governor (3) and fuel pump (8).
6. Install new O-ring (18) and shutoff valve (17) on governor (3) with two washers (14), new lock-
washers (15), and screws (16).
5-60
