TM 9-2320-260-34-1
5-23. FUEL PUMP HOUSING MAINTENANCE (Contd)
4. Install new O-ring (13) and plug (14) on housing (7).
5. Apply lubricating oil on new O-ring (21) and install on throttle shaft (1).
6. Install throttle shaft (1) on housing (7) with retaining ring (23).
7. Install throttle lever (15) on throttle shaft. (1) with washer (19), screw (20), washer (16), new lock-
washer (17), and nut (18).
8. Install new filter element (12) and spring (11) on housing (7) with new seal (10) and cap (9).
9. Install plug (22) on housing (7).
e. Installation
1.
Position new gasket (27) and housing (7) on front cover (26) with washer (28), new lockwasher (29),
and screw (30).
2. Install six washers (25) and screws (24) on front cover (26) and housing (7).
FOLLOW-ON TASKS:
Remove fuel pump from holding fixture (para, 5-14).
Calibrate fuel pump (para. 5-25).
5-65
