TM 9-2320-260-34-1
5-21. FUEL PUMP AIR CYLINDER MAINTENANCE (Contd)
Remove spring (15) from throttle lever (13) and bracket (14).
4.
5.
Loosen nut (9) and adjusting screw (10).
6.
Place throttle lever (11) forward in full throttle position and hold. Turn adjusting screw (10) until it
touches air cylinder piston shaft (12).
7.
Release throttle lever (11), hold adjusting screw (10), and tighten nut (9).
Install spring (15) on throttle lever (13) and bracket (14).
8.
Disengage transfer power takeoff lever (TM 9-2320-260-10).
9.
NOTE
Perform step 10 for M816 wrecker truck.
Disengage crane drive control lever (TM 9-2320-260-10).
10.
5-57
