TM 9-2320-260-34-1
3-60. FUEL CROSSOVER CONNECTOR INSTALLATION
THIS TASK COVERS:
Installation
INITIAL SETUP
MATERIALS/PARTS
APPLICABLE MODELS
Eight O-rings (Appendix D, Item 270)
All
Eight screw-assembled lockwashers
TOOLS
(Appendix D, Item 383)
General mechanic's tool kit
Lubricating oil (Appendix C, Item 21)
(Appendix B, Item 1)
REFERENCES (TM)
Torque wrench, 1/4-in. dr.
(Appendix B, Item 105)
TM 9-2320-260-34P-1
Socket driver, 3/8-in. dr.
(Appendix B, Item 144)
Installation
NOTE
Ensure plugs are removed from fuel passages before installing fuel
crossover connectors.
1.
Lubricate eight new O-rings (4) with clean engine oil.
2.
Install eight new O-rings (4) and two fuel crossover connectors (2) in cylinder heads (3) with eight
new screw-assembled lockwashers (1).
Tighten screw-assembled lockwashers (1) alternately 34-38 lb-in. (3.8-4.3 Nm).
3.
FOLLOW-ON TASK: Remove engine from repair stand (para. 3-75).
