TM 9-2320-260-34-1
3-59. FLYWHEEL AND CLUTCH INSTALLATION
THIS TASK COVERS:
b. Clutch Installation
a. Flywheel Installation
INITIAL SETUP
MATERIALS/PARTS
APPLICABLE MODELS
Twelve lockwashers (Appendix D, Item 215)
All
REFERENCES (TM)
TOOLS
TM 9-2320-260-34P-1
General mechanic's tool kit
(Appendix B, Item 1)
GENERAL SAFETY INSTRUCTIONS
Clutch alinement kit (Appendix B, Item 5)
Flywheel is heavy. Use care when installing
Torque wrench, 3/4-in. dr.
flywheel.
(Appendix B, Item 2)
Two dowel pins (Appendix E, Figure E- 1)
a. Flywheel Installation
1. Install two dowel pins (2) in crankshaft (3).
WARNING
Flywheel is heavy. Use care when installing flywheel. Failure to do
so may result in injury to personnel.
NOTE
Assistant will help with step 2.
2. Position flywheel (1) over dowel pins (2) and install on crankshaft (3) with six washers (4) and
screws (5). Tighten screws (5) 200-220 lb-ft (271-298 Nm) in sequence.
3. Remove two dowel pins (2) from crankshaft (3).
