TM 9-2320-260-34-1
3-75. ENGINE REMOVAL FROM REPAIR STAND
THIS TASK COVERS:
Removal
INITIAL SETUP
MATERIALS/PARTS
APPLICABLE MODELS
All
Two gaskets (Appendix D, Item 115)
TOOLS
REFERENCES (TM)
General mechanic's tool kit
TM 9-2320-260-20
(Appendix B, Item 1)
TM 9-2320-260-34P-1
(Appendix B, Item 4)
GENERAL SAFETY INSTRUCTIONS
Chain
All personnel must stand clear during lifting
Lifting device
operations.
1.
Attach chain to two engine lifting brackets (1).
2. Attach lifting device to chain. Raise lifting device to remove slack from chain.
WARNING
All personnel must stand clear during lifting operations. A swing-
ing or shifting load may cause injury to personnel.
NOTE
Assistant will help with steps 3 and 4.
3. Remove eight screws (6) and washers (5) from mounting plate.
4. Remove engine (9) from engine repair stand.
5. Remove two screws (4), washers (3), and front engine mount adapter from front water header (2).
6. Remove five screws (7), washers (8), and rear engine mount adapter from rear water header (10).