TM 9-2320-260-34-1
Section V. ENGINE REPAIR
3-49. ENGINE REPAIR MAINTENANCE INDEX
PARA.
PAGE
TITLE
NO.
NO.
Cylinder Liners and Cylinder Block Maintenance
Cylinder Head Repair
Oil Pump Repair
3-50. CYLINDER LINERS AND CYLINDER BLOCK MAINTENANCE
THIS TASK COVERS:
a. Removal
d. Assembly
e. Installation
b. Disassembly
c. Cleaning and Inspection
INITIAL SETUP
MATERIAIS/PARTS (Contd)
APPLICABLE MODELS
Liner shim set (Appendix D, Item 482)
All
Two lockwashers (Appendix D, Item 215)
TEST EQUIPMENT
Flange gasket (Appendix D, Item 65)
Magnetic tester (Appendix B, Item 70)
Detergent (Appendix C, Item 12)
Drycleaning solvent (Appendix C, Item 48)
TOOLS
Lubricating oil (Appendix C, Item 21)
General mechanic's tool kit
Rags (Appendix C, Item 32)
(Appendix B, Item 1)
Antiseize tape (Appendix C, Item 50)
Cylinder liner puller (Appendix B, Item 76)
REFERENCES (TM)
Cylinder liner driver (Appendix B, Item 77)
Cylinder liner clamp set (Appendix B, Item 13)
TM 9-2320-260-34P-1
Gage block (Appendix B, Item 78)
EQUIPMENT CONDITION
Brush (Appendix B, Item 71)
Crankshaft and main bearing removed (para. 3-48).
Inside micrometer (Appendix B, Item 9)
Outside micrometer (Appendix B, Item 8)
GENERAL SAFETY INSTRUCTIONS
Telescoping gage set (Appendix B, Item 74)
Compressed air source will not exceed 30 psi
Depth micrometer (Appendix B, Item 16)
(207 kPa).
MATERIALS/PARTS
Eyeshields must be worn when cleaning with
Cylinder liner packing set
compressed air.
(Appendix D. Item 481)
Keep fire extinguisher nearby when using
Two expansion plugs (Appendix D, Item 323)
drycleaning solvent.
NOTE
All six cylinder liners are removed the same. This procedure
covers one cylinder liner.
Tag all cylinder liners for installation.
a. Removal
Using cylinder liner puller, remove cylinder liner (1) from cylinder liner bore (2).
