TM 9-2320-260-34-1
3-50. CYLINDER LINERS AND CYLINDER BLOCK MAINTENANCE (Contd)
NOTE
All six cylinder liners are disassembled the same. This procedure
covers one cylinder liner.
1. Remove red O-ring (6), black O-ring (5), and crevice seal (4) from cylinder liner (1). Discard
O-rings (6) and (5) and crevice seal (4).
2. Remove shim pack (3) from cylinder liner (1).
NOTE
Tag cylinder liners and shim packs for installation into correct
cylinder bore.
Tag all cylinder liners with mating cylinder bore number for
installation.
3. Place cylinder liner (1) and shim pack (3) on numbered rack.
3-137