TM 9-2320-260-34-1
3-24. ENGINE AND TRANSMISSION REPLACEMENT (Contd)
NOTE
Tag all wires for installation.
27. Remove screw (6), clip (7), and wire (5) from starter solenoid (4).
28. Remove nut (1), lockwasher (2), and wires (3) and (14) from starter solenoid (4). Discard lock-
washer (2).
29. Remove nut (11), lockwasher (12), wire (13), ground wire (10), and ground strap (9) from starter
motor (8). Discard lockwasher (12).
NOTE
Cam follower housing is mounted with screw-assembled lock-
washers on late model engines.
30. Remove screw-assembled lockwasher (17), bracket (16), and control cable (18) from cam follower
housing (15). Discard screw-assembled lockwasher (17).
31. Remove screw-assembled lockwasher (21), clamp (20), and harnesses (19) from cam follower
housing (22). Discard screw-assembled lockwasher (21).
3-82
