TM 9-2320-260-34-1
3-24. ENGINE AND TRANSMISSION REPLACEMENT (Contd)
CAUTION
Cap or plug all openings immediately after disconnecting lines
and hoses to prevent contamination. Remove cap or plugs prior to
installation. Failure to do so may result in damage to equipment.
NOTE
Tag all hydraulic lines for installation.
Have drainage container ready to catch hydraulic fluid.
8. Remove clamp (2) and return hose (3) from pump elbow (1).
9. Disconnect pressure hose (4) from adapter (5) on power steering pump (7).
10.
Remove adapter (5) and packing (6) from power steering pump (7). Discard packing (6).
NOTE
Perform step 11 if vehicle is equipped with personnel heater kit.
11.
Loosen clamps (9) and (12) and remove hoses (8) and (13) from valves (10) and (11).
3-78
