TM 9-2320-260-34-1
3-24. ENGINE AND TRANSMISSION REPLACEMENT (Contd)
15. Remove air governor tube (2) from elbow (1).
16. Remove air outlet tube (5) from elbow (3).
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures
near open flame. Injury to personnel may result.
NOTE
Tag cables, wires, lines, and parts for installation.
17. Remove tachometer driveshaft cable (4) from fuel pump (23).
18. Remove nut (12) and emergency shutdown control wire (11) from emergency shutdown valve (13).
19. Remove clamp (6) and cable (10) from fuel shutoff lever (7).
20. Remove fuel line (9) from fuel return line tee fitting (8).
21. Remove primer pump fuel line (16) from fuel pump (23).
22. Remove fuel inlet line (15) from inlet adapter elbow (14).
23. Remove nut (19), screw (18), and accelerator rod clevis (17) from accelerator lever (20).
24. Remove spring (21) from accelerator lever (20) and oil pump (22).
NOTE
Perform step 25 for M816 and M819 vehicles.
25.
Remove two screws (28), lockwashers (29), and air cylinder bracket (30) from VS governor (27)
Discard lockwashers (29).
26.
Pull spring-loaded pin (24) to one side of clevis (25) and remove clevis (25) from remote control
lever (26).
3-80
