TM 9-2320-260-34-1
3-15. ROCKER LEVER HOUSING AND PUSH TUBES MAINTENANCE (Contd)
1. Remove setscrew (6) from rocker lever housing (9).
CAUTION
When removing rocker lever shaft, position brass drift and lightly
tap on shaft. Striking the housing or levers will cause damage.
NOTE
Mark locations of rocker levers for installation.
Mark rocker lever shaft direction for installation.
2. Using brass drift, tap rocker lever shaft (8) from two exhaust (1), injector (2), and intake (3) rocker
levers and rocker lever housing (9).
3. Remove two packings (7) from rocker lever shaft (8). Discard packings (7).
4. Remove two exhaust (1), injector (2), and intake (3) rocker levers from rocker lever housing (9).
5. Remove six adjusting screws (4) and adjusting nuts (5) from two exhaust (1), injector (2), and
intake (3) rocker levers.
3-40