TM 9-2320-260-34-1
3-13. LIFTING BRACKETS REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
All
TM 9-2320-260-34P-1
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
Parking brake set (TM 9-2320-260-10).
(Appendix B, Item 1)
Hood raised and secured (TM 9-2320-260-10).
Torque wrench, 3/8-in. dr.
(Appendix B, Item 4)
MATERIALS/PARTS
Locknut (Appendix D, Item 170)
1. Remove locknut (3), screw (1), and surge tank mounting strap (7) from rear lifting bracket (2).
Discard locknut (3).
2. Remove four screws (4), washers (5), and two lifting brackets (2) from rocker lever housings (6).
1. Install two lifting brackets (2) on rocker lever housings (6) with four washers (5) and screws (4).
Tighten screws (4) 55-65 lb-ft (75-88 Nm).
2. Install surge tank mounting strap (7) on lifting bracket (2) with screw (1) and new locknut (3).
