TM 9-2320-260-20
THIS TASK COVERS:
a. Troop Seat Removal
c. Side Rack Installation
b. Side Rack Removal
d. Troop Seat Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M817
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Thirty-three locknuts
Parking brake set (TM 9-2320-260-10),
a. Troop Seat Removal
NOTE
Assistant will help with steps 1 and 2.
1. Release two latches (2) and remove troop seat (12) from side rack (3).
2. Remove troop seat (12) from side panel (7).
3. Remove five locknuts (10), screws (11), and legs (9) from supports (5). Discard locknuts (10).
4. Remove eight locknuts (8), screws (4), and four hinges (6) from supports (5). Discard locknuts (8).
5. Remove twelve locknuts (8), screws (4), and five supports (5) from four seatboards (1). Discard
locknuts (8).
b. Side Rack Removal
1. Remove strap (20) from pocket (19).
NOTE
Assistant will help with step 2.
2. Remove five pockets (19) from side panel (7).
3. Remove eight locknuts (18), screws (17), and five pockets (19) from board (13). Discard locknuts (18).
4. Remove two nuts (16), screws (14), latches (2), and washers (15) from board (13).
c. Side Rack Installation
1. Install two washers (15), latches (2), screws (14), and nuts (16) on board (13).
2. Install five pockets (19) on board (13) with eight screws (17) and new locknuts (18).
NOTE
Assistant will help with step 3.
3. Install five pockets (19) on side panel (7).
4. Install strap (20) on pocket (19).
14-88
