Rear Side Marker Lights Removal

TM 9-2320-260-20

14-39. FRONT AND REAR SIDE MARKER LIGHTS REPLACEMENT (Contd)

c. Rear Side Marker Lights Removal

NOTE

All rear side marker lights are replaced the same way. Mounting

brackets may differ.

1. Disconnect lead (5) from connector (4).

2. Remove two screws (13) and lens frame (12) from base (9).

3. Remove two clips (14) and lens (11) from lens frame (12). Discard clips (14).

4. Remove lamp (10) from base (9).

5. Remove four nuts (17), lockwashers (16), screws (15), base (9), and gasket (8) from bracket (7).

Discard lockwashers (16) and gasket (8).

6. Remove two locknuts (6), screws (2), four lockwashers (3), and bracket (7) from body (1). Discard

locknuts (6) and lockwashers (3).

d. Rear Side Marker Lights Installation

1. Install bracket (7) on body (1) with four new lockwashers (3), two screws (2), and new locknuts (6).

2. Install new gasket (8) and base (9) on bracket (7) with four screws (15), new lockwashers (16),

and nuts (17).

3. Install lamp (10) on base (9).

4. Install lens (11) on lens frame (12) with two new clips (14).

5. Install lens frame (12) on base (9) with two screws (13).

6. Connect lead (5) to connector (4).

14-76