TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Seven lockwashers
Parking brake set (TM 9-2320-260-10).
Hood raised and secured (TM 9-2320-260-10).
NOTE
The ducts are replaced the same way for the fuel burning
personnel heater kit. This procedure covers the hot water heater
kit only.
1. Loosen two clamps (17) and remove duct ( 16) from heater adapter (14) and diverter adapter (15).
2.
Loosen two clamps (10) and remove duct (1) from elbows (3) and (13).
3. Remove three nuts (11), lockwashers (12), screws (8), and hood (7) from right side panel (4). Discard
Iockwashers (12).
4. Remove four nuts (6), lockwashers (5), screws (2), elbow (3), and screen (9) from right side panel (4).
Discard lockwashers (5).
14-12
