TM 9-2320-260-20
I
I
THIS TASK COVERS:
a Removal
c. Installation
b. Inspection
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M819
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Four lockplates
Parking brake set (TM 9-2320-260-10).
1. Bend tabs on four lockplates (2) and remove eight screws (1) from two U-joints (4) and flanges (3).
Discard lockplates (2).
2. Remove two U-joints (4) and propeller shaft (5) from two flanges (3).
Inspect universal joints (3) for looseness or roughness. Replace universal joints (3) if damaged
1. Position propeller shaft (5) with two U-joints (4) on flanges (3).
2. Install two U-joints (4) on flanges (3) with four new lockplates (2) and eight screws (1).
3. Bend tabs on four lockplates (2) against eight screws (1).
13-109
