TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
c. Installation
b. Cleaning and Inspection
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
M816
q Parking brake set (TM 9-2320-260-10).
q Rear winch driveshaft housing removed
MATERIALS/PARTS
GAA grease (Appendix C, Item 16)
q Wrecker rear winch cable rollers removed
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
Remove propeller shaft (2) from yoke (4) and sleeve bearing (3) and route through three rear
crossmembers (1).
Inspect propeller shaft (2) for breaks, cracks, bends, and damaged splines. Replace propeller shaft (2)
if damaged.
Apply GAA grease to the splines of propeller shaft (2), route propeller shaft (2) through three rear
crossmembers (1) and sleeve bearing (3), and install into yoke (4).
13-40
