TM 9-2320-260-20
I
13-15. REAR WINCH REPLACEMENT (Contd)
1.
Install chains on rear winch (1) and lifting device.
WARNING
All personnel must stand clear during lifting operations. A swing-
ing or shifting load may cause injury or death to personnel.
NOTE
Assistant will help with steps 2 and 3.
2.
Raise rear winch (1) from supports and position rear winch (1) on wrecker body (5).
3.
Install rear winch (1) on wrecker body (5) with four screws (4), washers (3), and new locknuts (2).
Tighten locknuts (2) 200-235 lb-ft (271-319 Nm).
4.
Remove chains from lifting device and rear winch (1).
5.
Install swivel block (8) on bracket (12) with washer (10) and new cotter pin (9).
6.
Install yoke (7) on lever (6) with retaining pin (13) and new cotter pin (11).
7.
Install yoke (16) on tensioner lever ( 15) with retaining pin (17) and new cotter pin (14).
13-38
