TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-260-10).
M813A1 W/W, M818 W/W, M819 W/W
Front winch removed (para. 13-8).
MATERIALS/PARTS
Vehicle tiedown loop removed (para. 10-2).
Eight locknuts
Three lockwashers
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
1. Remove three screws (10), lockwashers (9), washers (8), and angle bracket (7) from channel
reinforcement (4). Discard lockwashers (9).
2. Remove four locknuts (6), screws (1), and rail extension (11) from channel reinforcement (4).
Discard locknuts (6).
3. Remove four locknuts (5), screws (2), and channel reinforcement (4) from rail (3). Discard
locknuts (5).
1. Install channel reinforcement (4) on rail (3) with four screws (2) and new locknuts (5).
2. Install rail extension (11) on channel reinforcement (4) with four screws (1) and new locknuts (6).
3. Install angle bracket (7) on channel reinforcement (4) with three washers (8), new lockwashers (9),
and screws (10).
