TM 9-2320-260-20
13-8. FRONT WINCH REPLACEMENT (Contd)
b. Installation
1.
Install chains around winch (2) and on lifting device.
2.
Install two mounting brackets (4) on winch (2) with eight new lockwashers (5) and screws (6).
WARNING
All personnel must stand clear during lifting operations. A swing-
ing or shifting load may cause injury to personnel.
NOTE
Assistant will help with step 3.
3.
Position winch (2) and two mounting brackets (4) on vehicle.
4.
Install six screws (1), new lockwashers (11), and washers (10) on two mounting brackets (4) and rail
reinforcements (12).
5.
Install two mounting brackets (4) on support brackets (9) with six screws (7), washers (8), and new
locknuts (3).
6.
Remove chains from winch (2) and lifting device.
13-20
