TM 9-2320-260-20
I
THIS TASK COVERS:
c. Installation
a. Removal
b. Inspection
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Cotter pin
Seal
Parking brake set (TM 9-2320-260-10).
Adhesive (Appendix C, Item 2)
1. Remove nine screws (4) and cowl vent screen (5) from kick panel (1).
2. Remove cotter pin (8), hinge pin (3), and cab cowl vent door (6) from bracket (2). Discard cotter
pin (8). .
Inspect cab cowl vent door seal (7). If damaged, remove seal (7) and clean seal (7) debris from cab cowling
mounting surface (9).
NOTE
Perform steps 1 and 2 only if cab cowl vent door seal was removed.
1. Apply adhesive to mounting side of cab cowl vent door seal (7) and cab cowling seal mounting
surface (9).
2. Install cab cowl vent door seal (7) on cab cowling seal mounting surface (9).
3. Install cab cowl vent door (6) and hinge pin (3) on bracket (2) with new cotter pin (8).
4. Install cab cowl vent screen (5) on kick panel (1) with nine screws (4).
11-42
