TM 9-2320-260-20
11-5. BRUSHGUARD AND STONEGUARD REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Nine locknuts
q Parking brake set (TM 9-2320-260-10).
q Hood raised and secured (TM 9-2320-260-10).
1. Remove two locknuts (14), washers (13), and screws (7) from brushguard (2) and two arms (5).
Discard locknuts (14).
2. Remove two locknuts (12), washers (11), screws (9), and brushguard (2) from two brackets (8).
Discard locknuts (12).
3. Remove five locknuts (1) and (10), screws (4) and (6), and stoneguard (3) from brushguard (2).
Discard locknuts (1) and (10).
1. Install stoneguard (3) on brushguard (2) with five screws (4) and (6) and new locknuts (1) and (10).
2. Install brushguard (2) on two brackets (8) with two screws (9), washers (11), and new locknuts (12).
3. Install brushguard (2) on two arms (5) with two screws (7), washers (13), and new locknuts (14).
11-7
