4-45. REAR COMPOSITE LIGHT HOUSING AND BRACKET REPLACEMENT (Contd)
i. Removal (M816)
1. Remove two nuts (23), lockwashers (24), screws (26), and reflector (25) from taillight guard (21).
Discard lockwashers (24).
2. Remove four screws (22) and taillight guard (21) from bracket (28).
3. Disconnect four leads (29) from wires (27).
4. Remove two screw-assembled lockwashers (20) and housing (30) from bracket (28). Discard screw-
assembled lockwashers (20).
5. Remove two locknuts (31), lockwashers (32), screws (19), and bracket (28) from ladder bracket (18).
Discard locknuts (31) and lockwashers (32).
j. Installation (M816)
1. Install bracket (28) on ladder bracket (18) with two screws (19), new lockwashers (32), and
locknuts (31).
2. Install housing (30) on bracket (28) with two new screw-assembled lockwashers (20).
3. Insert four leads (29) through hole in bracket (28) and connect to four wires (27).
4. Install taillight guard (21) on bracket (28) with four screws (22).
5. Install reflector (25) on taillight guard (21) with two screws (26), new lockwashers (24), and
nuts (23).
4-87
