4-45. REAR COMPOSITE LIGHT HOUSING AND BRACKET REPLACEMENT (Contd)
e. Removal (M813, M813A1, M814)
1. Remove two locknuts (17), screws (20), and reflector (21) from bracket (14). Discard locknuts (17).
2. Remove four locknuts (18), screws (22), and cover (16) from bracket (14). Discard locknuts (18).
3. Disconnect four leads (23) from wires (9).
4. Remove two screw-assembled lockwashers (15) and housing (24) from bracket (14). Discard screw-
assembled lockwashers (15).
6. Remove locknut (10), screw (25), nut (11), screw (13), two lockwashers (12), and bracket (14) from
cargo bed (9). Discard locknut (10) and lockwashers (12).
I
f. Installation (M813, M813A1, M814)
1. Install bracket (14) on cargo bed (9) with two new lockwashers (12), screw (13), nut (11), screw (25).
and new locknut (10).
2. Install housing (25) on bracket (14) with two new screw-assembled lockwashers (15).
3. Insert four leads (23) through hole in bracket (14) and connect to four wires (19).
4. Install cover (16) on bracket (14) with four screws (22) and new locknuts (17).
5. Install reflector (21) on bracket (14) with two screws (20) and new locknuts (18).
4-85
