TM 9-2320-260-20
Table 2-4. Electrical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
26. TURN SIGNALS OPERATE INCORRECTLY WITH TURN SIGNAL CONTROL LEVER IN ONE OR MORE
POSITIONS
Test turn signal control unit continuity.
Step 1. Place battery switch to OFF position.
Step 2. Remove harness connector from turn signal switch.
Step 3. Set multimeter to RX1 scale.
Step 4. Replace turn signal switch if any circuit does not test as shown in chart 1 below
END OF TESTING!
2-140
