TM 9-2320-260-20
Table 2-4. Electrical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
23. DIRECTIONAL SIGNAL INOPERATIVE
Test 1. Test turn signal lamps.
Step 1. Turn main light switch to SERVICE DRIVE position.
Step 2. Place turn signal lever in left or right position. Turn signals should flash on both sides.
a. If turn signal on left or right does not operate, go to test 2.
b. If turn signal on left or right operates, but does not flash, go to malfunction 25, test 2.
NOTE
Testing procedures for left and right turn signal leads 461 and
460 respectively, are performed the same, using tests
1 through 5. This test covers left side 461 turn signal
circuit only.
2-135
