TM 11-7440-293-14
REMOVING RADIO MOUNTING BASES MT-1029 /VRC.
4-86.
This task covers:
Removal
INITIAL SETUP
Tools
Personnel Required
1/2- inch box wrench
One mechanic
Materi als/Parts
Equipment Condition
Radio receiver transmitters
Radio mounting bases 1029/VRC
removed. (See paragraph 4-78.)
(2 required)
ACTION
ITEM
REMARKS
LOCATION
1.
Roadside, radio
Nut (1) and
Using 1/2-inch box wrench, remove.
mount
Iockwasher (2)
There are five nuts. Step 1 is
typical for all five nuts.
00 step 1 again.
2.
Mounting studs
Studs (3)
Radio mounting
Remove.
3.
base MT-1029/VRC (4)
Do steps 1, 2 and 3 for Second radio
Radio mounting
4.
Curbside,
radio mount
base MT-1029/VRC (5)
mounting base.
Radio mounting
See paragraph 4-31 for
5.
bases MT-1029/VRC
4-182
