TM 11-7440-293-14
4-31. INSTALLING RADIO MOUNTING BASES MT-102WRC.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
1/2-inch box wrench
Equipment Condition
Materials/Parts
Tacfire rack installed.
5/16-inch Iockwasher (10 required)
5/16-18-inch hex nut (10 required)
Radio Mounting Base MT-1029/VRC
(2 required)
ACTION
REMARKS
ITEM
LOCATION
NOTE
Install radio mounting bases with latches facing out.
Put radio mounting base on studs.
1. Roadside of radio
Radio mounting
mount
base (1) and
studs (2)
2.
Lockwasher (3) and
Using 1/2-inch box wrench, install.
There are five studs. Step 2 is
nut (4)
typical for all five studs.
Do step 2 again.
Studs (2)
3.
Radio mounting
4. Curbside of radio
Do steps 1, 2 and 3 again for second radio
base (5)
mounting base.
mount
4-58
