TM 11-7440-293-14
4-84. REMOVING/lNSTALLING ELECTRONIC EQUIPMENT TABLE. (CONT)
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION
1.
Electronic equip-
Put electronic equipment table on radio mount
and aline holes.
ment table (1) and
radio mount (2)
2.
Screw (3), flat
Install, handtighten.
washers (4) and
There are eight screws. Step 2 is
nut (5)
typical for all eight screws.
3.
Screw holes (6)
Do step 1 again.
4.
Screw (3) and
Using two 1/2-inch box wrenches, tighten..
nut (5)
There are eight screws. Step 3 is
typical for all eight screws.
Screws (3) and
Do step 3 again.
5.
nuts (5)
NOTE
printer rack. See TM 11-7440-251-10 and TM 11-7440-253-10-1
for installation of tacfire components.
4-178