TM 11-7440-293-4
4-83. REMOVING/lNSTALLING KEY GENERATOR RACK.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Personnel Required
One mechanic
l/2-inch box wrench (2 required)
Materials/Parts
Equipment Condition
All power in vehicle off.
Key generator rack
4-inch ground straps removed. (See
30-inch grounding strap removed.
(See paragraph 4-79.)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
See TM 11-7440-251-10 and TM 11-7440-253-10-1 for removal
of key generator and power distribution box.
1. Lower supports of
Screw (1), flat
Using two 1/2-inch box wrenches, remove.
There are four screws. Step 1 is
key generator rack
washer (2) and
typical for all four screws.
nut (3)
Do step 1 again.
2.
Screws (4)
Screw (5), lock-
Using 1/2-inch box wrench, remove.
3. Curbside, vertical
washer (6) and
support
flat washer (7)
Using 1/2-inch box wrench, remove.
Screw (8), lock-
4. Roadside, vertical
washer (9) and
support
flat washer (10)
Remove.
Key generator
5. Roadside, tacfire
For storage, put hardware in cloth
rack
rack (11)
bag, attach to key generator rack
and pack in original carton.
4-172
