TM 11-7440-293-14
4-82. REMOVING/INSTALLING MESSAGE ENTRY GROUP RACK.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
1/2-inch box wrench (2 required)
Equipment Condition
Materials/Parts
Message entry group rack
All power in vehicle off.
4-inch ground straps removed.
(See paragraph 4-80.)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
See TM 11-7440-251-10 and TM 11-7440-253-10-1 for
removal of message entry group.
1.
Lower supports of
Screw (1), flat
Using two 1/2 inch box wrenches, remove.
There are four screws. Step 1 is
message entry
washers (2) and
typical for all four screws.
nut (3)
group rack
Do step 1 again.
2.
Screws (4)
Screw (5), lock-
Using 1/2-inch box wrench, remove.
3. Curbside, vertical
washer (6) and
support
flat washer (7)
Using 1/2-inch box wrench, remove.
4. Roadside, vertical
Screw (8), lock-
washer (9) and
support
flat washer (10)
Remove.
Message entry
5. Center position,
For storage, put hardware in cloth
group rack (11)
tacfire rack
bag. Attach to message entry group
rack and pack in original carton.
4-168
